How to Choose a Turntable
Coaxing music from a record depends on a stable platter, a well-matched cartridge, and isolation that keeps footfalls and hum out of the groove. Drive type, tonearm quality, and the cartridge fitted matter more than the finish on the plinth. Built-in stages and connectivity shape how easily the deck joins your system. Matching the turntable to your setup and records keeps a starter deck from wearing your collection or fighting your amplifier.
Drive Type and Speed Stability
Belt-drive decks isolate the platter from motor vibration through an elastic belt, which suits quiet listening, while direct-drive decks couple the motor directly for strong torque and instant speed. Direct drive suits anyone who cues or handles records often, and belt drive suits pure listening.
Speed accuracy and low wow and flutter keep pitch steady, and an audible wobble betrays a cheap motor or worn belt. A deck with a speed adjustment or an electronic control holds the correct rate better than a basic fixed motor.
Tonearm and Cartridge
The tonearm carries the cartridge across the record, and a well-balanced arm with adjustable tracking force protects the groove from a stylus pressing too hard. A cheap fixed arm cannot be set correctly, risking record wear over time.
The cartridge turns groove movement into a signal, and a decent moving-magnet cartridge on a starter deck lifts the sound noticeably. Check whether the cartridge is a standard mount you can upgrade later, since an integrated one limits future improvement.
Built-In Phono Stage and Connectivity
A phono signal needs special amplification, so a built-in phono stage lets you plug the deck into any line input or powered speaker without a separate box. Audiophiles often prefer to switch it off and use an external stage for better sound.
Some decks add a USB output for digitising records and Bluetooth for wireless speakers, which trades ultimate fidelity for convenience. Confirm whether your amplifier has a phono input, since that decides whether you need the deck’s built-in stage at all.
Plinth, Platter, and Isolation
A heavy plinth and platter resist the vibration and footfall that a light deck transmits into the groove as rumble. Isolation feet and a dense platter mat further damp resonance for a cleaner sound.
Placement matters as much as the deck; a turntable on a flimsy shelf near a speaker picks up feedback that a solid, isolated surface avoids. A sprung or well-damped design forgives a less-than-ideal spot in a real room.
Setup, Adjustment, and Automation
Manual decks require you to set tracking force, anti-skate, and sometimes cartridge alignment, which rewards care with better sound and lower wear. Fully automatic decks start, return, and stop the arm at a button, which suits those who want simplicity over adjustment.
An adjustable counterweight and anti-skate are worth having, since a deck that cannot be dialled in properly wears records unevenly. Weigh how much fiddling you enjoy against the convenience of automation and a pre-fitted, aligned cartridge.
Build, Upgradeability, and Extras
A deck with a standard cartridge mount, a decent arm, and a removable stage gives room to upgrade as your ears and system develop. A sealed, all-in-one design is simpler but caps how far the sound can improve.
A dust cover protects the stylus and record between plays, and a quality mat steadies the disc. Weigh built-in speakers, offered on some all-in-one units, against sound quality, since separate speakers almost always sound better.
What to Check Before You Buy
- Choose belt drive for quiet listening or direct drive for cueing and torque.
- Confirm low wow and flutter and a way to fine-tune speed.
- Look for an adjustable tonearm with settable tracking force and anti-skate.
- Check the cartridge is a standard, upgradeable mount.
- Decide whether you need a built-in phono stage for your amplifier.
- Favour a heavy plinth and platter with isolation feet for a clean sound.
- Weigh automation and a dust cover against how much you like to adjust.
How to Choose a Turntable
Start with your amplifier and how you listen, then weigh drive type, tonearm, and phono stage against upgrade plans.
- Check whether your amplifier or speakers have a phono input.
- Choose belt or direct drive based on listening versus handling records.
- Confirm the tonearm allows tracking force and anti-skate adjustment.
- Decide if you need a built-in phono stage, USB, or Bluetooth.
- Favour a standard cartridge mount so you can upgrade later.
- Plan placement on a solid, isolated surface away from speakers.
Ready to shop? Browse our full list of Turntables to compare current options and prices.
