What to Know Before Buying Dog Stairs
Dog stairs provide a stepped approach to elevated surfaces—beds, sofas, car seats—without the jumping impact that stresses joints over time. They differ from ramps by using discrete horizontal steps rather than a continuous slope, which some dogs navigate more naturally while others find more challenging. Key factors are the number of steps and total height to reach the target furniture, individual step width and depth for your dog’s foot size, surface traction, and structural stability so the stairs don’t rock during use.
Step Count and Total Height
Dog stairs range from 2-step units (reaching 14 to 18 inches) to 5-step units (reaching 24 to 30 inches). Match the total height of the stairs to the surface height being accessed. A stair that reaches only to the edge of the bed—not onto the surface itself—is inadequate. The top step should allow the dog to step onto the surface rather than still needing to jump from the top step.
More steps at a lower total rise angle are preferable for dogs with mobility issues—each step requires lifting the leg less high. For a 25-inch bed, 4 steps with 6-inch risers are easier to navigate than 3 steps with 8-inch risers. If the dog has trouble lifting its legs high, step riser height matters as much as total unit height.
Step Width and Depth
The step platform depth (front to back) should be long enough for the dog’s full foot to land comfortably. For large dogs, narrow steps (4 to 5 inches deep) are difficult to use without the foot hanging off the edge. A step depth of at least 8 to 10 inches is preferable for medium to large breeds. For small dogs under 15 lbs, 5 to 6-inch step depth is typically adequate.
Step width (side to side) should allow the dog to walk without its legs spilling off the sides. Most dog stairs are 14 to 20 inches wide—adequate for medium breeds. Large breeds with wide stances benefit from stairs that are at least 18 to 20 inches wide to give both paws stable landing space on each step.
Surface Traction
A dog that slips on the step surface during use loses confidence quickly and may refuse to use the stairs. Non-slip surfaces—foam steps covered in carpet, rubber tread covers, or textured plastic—provide reliable traction. Smooth plastic steps are hazardous and should be avoided without aftermarket non-slip cover additions.
Removable step covers are a useful feature for washing—the covers accumulate fur, dander, and tracked-in dirt rapidly. Covers that are machine-washable or can be replaced individually extend the useful life of the stairs without requiring replacement of the full unit. For dogs with incontinence issues, waterproof covers or foam that resists moisture penetration is important.
Structural Stability
Dog stairs that rock, shift, or bow under the dog’s weight during use are a safety hazard. Heavy dogs or active dogs that bound up stairs need a unit that remains completely stable at full dynamic load. Foam stairs are lightweight and quiet but can compress and shift under heavier dogs. Plastic or wooden frame stairs are more stable but heavier.
Rubber non-slip feet on the base are the most important stability feature for hard floors. On carpet, the stair often grips naturally. On tile or hardwood, stairs without rubber feet slide with each step, causing the dog to stumble. Confirm the base has rubber feet or a non-slip base pad before purchasing for hard floor use.
Material Options
Foam dog stairs are the most common material for small dogs. They’re lightweight, quiet, and the soft foam doesn’t hurt a dog if it brushes against it. Foam is not appropriate for heavy dogs (over 40 lbs) or for dogs that chew, as it compresses and eventually collapses under heavier load or chewing.
Plastic or molded composite stairs are more structurally rigid and hold higher weight ratings. Wooden dog stairs are the most structurally sound but heavier and more expensive. For dogs over 30 to 40 lbs, a plastic or wood stair frame is preferable to foam. Combination designs with a plastic frame and foam steps balance structural integrity with surface softness.
What to Check Before You Buy
- Measure furniture height and confirm the stairs’ total height reaches the surface, not just the edge
- Check individual step riser height—lower risers (5 to 6 inches) are better for dogs with mobility issues
- Confirm step depth (front to back) is appropriate for your dog’s foot size
- Choose non-slip step surfaces—carpet, rubber tread, or textured material over smooth plastic
- Verify rubber non-slip feet on the base for use on hard floors
- Select foam only for small dogs under 40 lbs; choose plastic or wood frame for larger dogs
- Look for removable, washable step covers for easy maintenance
How to Choose Dog Stairs
Measure the furniture height and your dog’s weight first, then match step count, riser height, and material accordingly.
- Measure the height of the furniture the stairs need to reach
- Confirm the stair’s total height matches that measurement with the top step landing on the surface
- Calculate individual riser height by dividing total height by step count—choose lower risers for mobility-impaired dogs
- Verify step depth and width are appropriate for your dog’s foot and body size
- Choose material based on weight: foam for dogs under 40 lbs, plastic or wood frame for heavier dogs
- Confirm rubber non-slip base feet for hard floor use
Ready to shop? Browse our full list of Dog Stairs to compare top-rated options.
