What to Know Before Buying a Drill Bit Set
Drill bit sets vary widely in quality, and the difference between a $15 set and a $60 set shows up quickly in the first hour of hard use. Material and coating determine how long bits stay sharp, especially in metal and hardwood. Beyond quality, the right set depends entirely on what you’re drilling — a general-purpose twist bit that handles wood and soft metal won’t cut masonry, and a multi-purpose bit designed to do everything often does nothing well. Understanding what the specs on the packaging actually mean will help you pick a set that stays sharp, handles your materials, and doesn’t leave you with 40 bits you’ll never use.
Bit Material: HSS, Cobalt, and Carbide
High-speed steel (HSS) is the standard material for general-purpose drill bits. It handles wood, plastics, and soft metals well, holds a reasonable edge, and can be resharpened. Most entry-level and mid-range sets use HSS. The tradeoff is that HSS loses hardness quickly when overheated — common when drilling metal without adequate lubrication or at too high a speed.
Cobalt bits (typically M35 or M42 grade — 5% or 8% cobalt alloyed into the steel) are harder and more heat-resistant than standard HSS, making them significantly better for stainless steel, cast iron, and hard alloys. They cost more but last much longer in demanding metal applications. Carbide-tipped bits are for masonry — concrete, brick, tile — and won’t hold up to metal drilling. Using the wrong material for your application destroys bits fast.
Coatings and What They Do
Titanium nitride (TiN) coatings are the most common upgrade on consumer drill bit sets. The gold-colored coating reduces friction and surface heat during drilling, extending bit life noticeably compared to uncoated HSS in wood and soft metal. Important caveat: once a TiN-coated bit is resharpened, the coating is gone on the cutting edge.
Black oxide is a light surface treatment that provides mild corrosion resistance and slightly reduced friction — better than bare HSS but a smaller improvement than TiN. Titanium carbonitride (TiCN) is a harder gray coating that outperforms TiN in harder metals. For most DIY and light trade use, a TiN-coated HSS set covers the majority of applications. If you’re regularly drilling hardened steel, step up to cobalt regardless of coating.
Shank Types: Round vs. Hex
Standard round shanks fit any drill or driver chuck and are the most versatile. Most full-size sets use round shanks (usually 3/8-inch) that work in both corded drills and cordless drill drivers. The round shank can slip in the chuck if the bit catches at high torque, which is occasionally an issue.
Hex shanks (1/4-inch) are designed for quick-release chucks common on impact drivers and quick-change drill systems. They don’t slip in quick-release chucks but can be slightly less concentric at the tip than a quality round-shank bit. Some sets offer a combination of hex-shank bits for impact driver use and round-shank bits for drill use — useful if you rely on both tools regularly.
Size Range and Included Sizes
More bits don’t always mean more value. A 230-piece set that includes 20 copies of the same small sizes isn’t as useful as a focused 29-piece set covering every fractional increment from 1/16 to 1/2 inch. The standard fractional range for general-purpose drilling is 1/16 to 1/2 inch in 1/64-inch increments, giving 29 sizes.
For metric work, a set covering 1mm to 13mm in 0.5mm steps is the equivalent range. If you primarily work in wood, a set focused on the 3/32 to 3/8 inch range supplemented with a few pilot bits is more practical than a 100-piece set with many redundant sizes. Decide what materials you drill most and choose a focused set over a padded one.
Point Geometry: Standard vs. Split-Point
Standard twist bits have a 118-degree point angle, which works for wood, plastic, and soft metals. Split-point bits (135-degree) have a self-centering point that starts without a pilot dimple and stays on target better on curved or slick surfaces like metal pipe, making them preferable for metal drilling.
Brad-point bits have a center spur and outer spurs that score wood fibers cleanly before the main cutting edges remove material — this produces cleaner, more accurate holes in wood than any twist bit. If you’re drilling wood and care about hole quality, a set of brad-point bits alongside a general-purpose twist set is worth having. Spade and Forstner bits cover large-diameter holes in wood and are typically sold separately.
Storage and Case Organization
A drill bit set is only useful if you can find the right bit quickly. Good cases organize bits by size in labeled slots so you can return each bit to the right place after use. Indexed cases with each slot labeled by size are significantly more useful than cases that just hold bits in a generic tray.
Metal index cases are the most durable storage option. Plastic flip-top cases with labeled individual slots work well for bench use but crack at the hinges over time. Bit rolls work for traveling with a small focused set but are inconvenient when you need to find a specific size fast. Avoid sets that arrive in unlabeled cases — you’ll spend time reading shank markings every time you need a size.
What to Check Before You Buy
- Identify your primary drilling materials before selecting bit material — HSS, cobalt, or carbide-tipped.
- Check the coating type — TiN for general use, TiCN or cobalt for harder metals.
- Verify the shank type matches your drill or impact driver chuck.
- Review the size range — make sure it covers the fractional or metric sizes you actually use.
- Look for split-point geometry if you drill metal frequently to avoid needing a center punch.
- Check the case — indexed, labeled slots are worth prioritizing over bulk storage.
- Confirm the set doesn’t over-represent small sizes at the expense of mid-range bits.
- Check included extras — countersinks or step bits add value if they match your actual work.
How to Choose a Drill Bit Set
Choosing a drill bit set is mostly about matching material, coating, and size range to your actual work.
- List your primary materials — wood, metal type, masonry, plastic — before evaluating any set.
- Choose bit material accordingly: HSS for wood and soft metal, cobalt for hard metal, carbide-tipped for masonry.
- Decide on coating: TiN for longevity in general use, bare HSS only if you’ll be resharpening frequently.
- Match shank type to your primary tool — round shank for drills, hex shank for impact drivers.
- Verify the size range covers your most common hole sizes, not just a wide span with gaps at useful sizes.
- Check the case organization — indexed labeled slots prevent wasted time searching for the right bit.
Ready to shop? Browse our full list of Drill Bit Sets to compare top-rated options.
